High Pressure Contrast Injection Accessories

Request a Quote

Contrast Media Consumables

Approval: EU-MDR and ISO13485
Sterilization Method: ethylene oxide sterilization, non-toxic, non-pyrogenic
Components: quick fill tube, coiled connecting/coiled Y-connecting tube, spike
Pressure Limit: 0.35MPa(50psi)-83Mpa(1200Psi)

Registration Number of Approval Certificates

EU MDR No.: G10 045084 0043 Rev.00
EU ISO13485 No.: Q5 045084 0039 Rev.01

Download Registration Certificates

Winged infusion set and spike

Coiled Y-connecting tube, quick fill tube and spike

High-pressure connecting tube and coiled tube (300/600/1200psi)

This type of injection tubing is commonly used with high-pressure syringes for CT, DSA, and MRI examinations, for precise and safe delivery during advanced imaging procedures. For CT and MRI scans, tubing with a pressure resistance of up to 2.1MPa (300psi) ensures reliable performance and safety. For the more demanding DSA interventional imaging, injection tubing that withstands pressures greater than 2.1MPa (300psi) is recommended. High pressure injection tubing guarantees optimal imaging results by maintaining the integrity of the contrast agents throughout the procedure.

Packaging

Our products are available in three types of packaging: small, medium, and large.

Individual packaging: Each product is individually packaged using dialysis paper and composite film (PET/PE) heat-sealed packs, or high-pressure PE bags. This method ensures sterility and protection for each unit.
Medium packaging: These individual packs are then grouped into medium-sized boxes made from grey base whiteboard paper or fine corrugated materials, providing an additional layer of protection.
Bulk packaging: Finally, the medium boxes are placed into large, sturdy corrugated cardboard boxes, which provide robust protection during storage and transport, ensuring that the products arrive safely at their destination.

Single-use Disposable Medical Products Manufacturer Since 1997

High Pressure Contrast Injection Accessories